Original CP2102 chip, generate COM port after installing the driver.

Connect standard MICRO MINI-USB line input to computer USB interface, with 3.3V and 5V voltage two power output

With self-recovery fuse. In the event of an unexpected short circuit, it can effectively protect your downloader and computer USB port

On-board status indicator, transceiver indicator, the status indicator will be on after the driver is properly installed, and the transceiver indicator will flash when communicating, with the running LED indicator.

Support baud rate from 300bps to 1Mbps

Communication format support: 1) 5, 6, 7, 8 data bits; 2) support 1, 1.5, 2 stop bits; 3) odd, even, mark, space, none check

Support operating system: windows 8.1/7/vista/xp/98, Mac OS-X/OS-9, Linux

USB socket interface is MICRO MINI-USB

SMD components are welded by regular company, with stable quality and beautiful appearance.

With DTR trigger signal output, you can directly download program communication to Arduino motherboard such as arduino pro mini ATMEGA328P.

Module size: 16mm*20mm Super small.

Features:

1. Includes USB transceiver, no external circuit

2. Built-in clock circuit, no external circuit breaker required

3. Built-in power-on reset circuit

4. On-chip voltage regulation can output 3.3V voltage

5. Meet the requirements of the USB2.0 specification

6.SUSPEND pin supports USB status hangs

7. Asynchronous serial data bus is compatible with all handshake and modulation regulator interface signals

8. Supported data formats are data bit 8, stop bit 1, 2 and check digit

9. Intrinsic 512-byte receive buffer and 512-byte transmit buffer

10. Support hardware or X-ON/X-OFF handshake