This heater is suitable for GORDAK 850A.850B.952.952C.952B.952D, 952V.950D soldering station, and the same machine with another different brand

Specifications:

• Senor type: type K
• Heater resistance value: about 80 ohms

Notice for replacing the hot air soldering station heating element:

• Take out the heating material from the soldering iron steel pipe and make sure not damage the mica heat insulatorin it Please carefully inspect the mica heat insulator to make sure it is perfect after replacing the heating material each time. You must replace it first when you find damage.

Otherwise, serious leakage accidents may occur.

• Don't press or twist the heater when installing it, and notice the orientation hole on the iron tube to aim at the horizontal orientation.
• Make sure the front of the heating element does not touch the front steel mesh. Otherwise, serious leakage accidents may occur.
• When connecting the heating element leads, please connect each lead correctly and pay attention to the polarity of the sensor lead. There are four leads of the heating material Two in sensor, there are open model and acme model according to the port model.