This premium CAT6 UTP (Unshielded Twisted Pair) patch cord delivers a high-performance 10 meter factory-terminated networking cable designed to strict German quality standards. Outfitted with standard corporate grey insulation and integrated snag-proof RJ45 boots, this extra-long 10 meter cord provides the expansive reach required for backbone patching, long-distance structural drops across office perimeters, ceiling-mounted device runs, and clean routing between remote server enclosures.

Specification

• Length: 10 Meters (Approx 32.8 feet)
• Cable Category: Category 6 (CAT6 Channel Certified)
• Conductor Material: 100% Pure Bare Stranded Copper (Provides superior flexibility over solid core)
• Shielding Type: UTP (Unshielded Twisted Pair)
• Data Transmission Speeds: Up to 1 Gbps and 10 Gbps at short patch conditions
• Maximum Bandwidth: 250 MHz
• Connector Termination: Factory molded RJ45 plugs with 50 μm gold-plated contacts
• Wiring Standard: T568B straight-through configuration
• Color: Grey
• Manufacturing Standard: Made in Germany

Features

• Snag-Proof Molded Boot Protection: The RJ45 connector features a molded plastic arch hood that covers the fragile locking tab clip. This allows the cable to be pulled through long, densely packed conduits, raised floors, or wall partitions without the plastic tab catching, bending, or snapping off.
• 100% Pure Stranded Copper: Formulated with fine copper strands rather than a single solid wire. This makes the cable highly flexible and resilient over long distances, allowing it to navigate multiple corners and bend inside baseboard channels without fracturing the inner metal structures.
• 50-Micron Gold-Plated Contacts: The modular RJ45 pins are plated with heavy-duty gold layers, preventing oxidation over long deployment life cycles and ensuring low-resistance surface connections.
• Low Signal Attenuation: Engineered with precise internal wire pair twisting to minimize signal attenuation and cross-talk over the full 10-meter length, ensuring stable multi-gigabit throughput.

Common Applications

• Long-Distance Inter-Rack Bridging: Connecting core switch racks to distribution frames located at opposite ends of large data centers or server rooms.
• Ceiling & Perimeter Workstation Cabling: Routing network drops cleanly from overhead cable trays, drop ceilings, or wall perimeters down to localized office cubicles or conference room tables.
• Wireless Access Point (WAP) & IP Camera Links: Spanning the long distances required to link high-altitude ceiling-mounted Wi-Fi access points or security cameras back to a localized PoE switch.
• Temporary Network Extensions: Deploying stable, wired temporary connections for staging environments, classrooms, or trade-show booths.

Professional Usage & Deployment Tips

• Manage Structural Cable Load: A 10-meter cable has noticeable physical weight when bundled. Avoid letting the length hang loosely off the back of a server rack, as the downward gravitational strain can warp the RJ45 port pins or crack the connector clip. Secure the run to horizontal management bars or cable trays at regular intervals.
• Respect the Natural Bend Radius: Even though stranded copper is resilient and flexible, bending it at a harsh 90℃ angle directly at the boot edge can warp the internal pair twists, increasing crosstalk. Maintain a gradual bend curvature of at least 4 times the cable's outer diameter (approx 1 inch or 25mm).
• Avoid Hot Equipment Heat Exhaust Paths: Do not route the cable directly across the rear hot-air exhaust vents of enterprise servers or high-draw power distribution units (PDUs). Sustained structural heat can break down the PVC/LSZH outer jacket over time and degrade signal transmission efficiency.
• Deploy Safe Cable Management: When grouping multiple patch cables together, use soft hook-and-loop (Velcro) straps rather than tight plastic zip-ties. Cinching plastic ties down aggressively can pinch the internal cross-spline or deform the twisted pairs, which can downgrade the cable's bandwidth.