Features:

• DC voltage input, low temperature and low noise
• High quality power cord, durable, safe and secure
• Heat dissipation on the side of the fuselage, reduce damage and extend service life
• Idea for modelers, jewelers, electricians & DIY
• Apply to mold processing, repairing & burnishing
• Used to punch and drill holes on aluminum boards, thin copper boards, wooden boards, plastic boards, chipboard, printed circuit boards, epoxy boards, etc.
• For gold & silver jewelry polishing
• To cut, polish & grind some precision components

Technical Details:

• Supper Quality And Normal Quality DC 12V Charger
• Voltage: 12V
• No-Load Speed: 12000RPM
• Information Voltage: AC 220V/50Hz
• Throw : 0.5-3.0mm
• Torsion : 530 g/cm
• Pivoting speed : 8000-12000rpm
• Principle item measurements: 162x40mm (L x W)
• Principle item weight: 120g
• How to change accessories:
• Make the machine in a state of rest
• Hold the spindle lock by hand
• Unscrew the collet nut clockwise
• Put accessories in the collet nut, tighten the collet nut counter clockwise

PLEASE NOTE:

• Glass is very hard and brittle. Drilling a hole into glass, often causes it to shatter or crack.
• DO NOT use this tool in a flame able gas environment.
• DO NOT store in wet, corrosive gas, high dust environment.
• Ask the professionals to maintenance if the tool was damaged.
• DO NOT privately disassembly.

Package Include:

• 1 Electric Drill
• 5 Drills (Φ0.5 , 1.0 , 1.5 , 2.5 , 3.0mm)
• 4 Grinds
• 5 Attachment Fixtures (Φ0.5 , 1.0 , 1.5 , 2.5 , 3.0mm)
• 1 Screw Head
• 1 Sander
• 1 Power Adapter
• 1 Tool Box